- What is a Short Throw Projector?
A Short Throw Projector is a projector that projects or “throws” the image a short distance from the device to the projection screen.
Some common uses for a short-throw projector include: Small learning spaces, conference rooms where detailed documents are shared, trade shows where a big image gets big attention, and in home theaters with projector placement limitations.
- What ports are available on the U-100?
- What should I do if there is no display?
- Check if the power cord of the unit is connected to the power outlet correctly.
- Check if the power is turned on.
- How do I deal with no image being projected?
- Check if the unit is connected to any data source such as USB or other equipment.
- Check if the unit is switched to the correct channel.
- Check if the input signal from the computer is set correctly. (The computer’s resolution is usually set to 1024X768, the refresh rate is set to 60Hz).
- When connecting to a laptop, you usually need to change the output settings of the monitor.
- What do I do if there is no sound?
- Check if the audio cable is connected if there’s an external audio system being connected.
- Adjust the audio source.
- Adjust the projector volume.
- What should I do if I cannot play images normally after plugging in the USB?
- Remove and insert the USB again to make sure they are inserted in the the place properly or check if there are photos stored in the USB.
- Check if the “Local” channel & a photo file are selected.
- Make sure the photo files are in a supported format.
- What should I do if I cannot play audio after plugging in the USB?
- Remove and insert the USB again and make sure they are inserted in the place properly, or check if there are compatible music files in USB.
- Check if the “Local” channel & a music file are selected.
- Turn up the volume
- What should I do if I cannot play videos after plugging in the USB?
- Remove and insert the USB again and make sure they are inserted in the place properly, or check if there are compatible video files in USB.
- Check if the “Local” channel & a video file are selected
- What should I do if the remote control does not respond?
- Change the battery for the remote control
- Make sure there are no obstacles between the remote controller and the projector.
- Make sure the remote controller is within the operating range.
- What should I do if the remote control does not respond?
- Change the battery for the remote control
- Make sure there are no obstacles between the remote controller and the projector.
- Make sure the remote controller is within the operating range.